Sandalwood Noir, Libbey Status Pair

Method

1. 01

   Weigh the wax into a pouring pitcher to the gram. Accuracy here decides everything downstream.

2. 02

   Heat the wax in a double boiler to 80°C, stirring gently until fully clear. Do not exceed 85°C.

3. 03

   Take the pitcher off the heat. Let the wax cool to 62°C, then stir in fragrance and dye, if used, for a full two minutes.

4. 04

   Continue cooling, stirring occasionally, until the wax reaches 57°C.

5. 05

   Pre-warm the vessels in a 50°C oven for ten minutes. Centre the wick, fix it with a wick bar.

6. 06

   Pour in a single steady stream into one side of the vessel until full. Do not move the vessels for at least four hours.

7. 07

   Cure undisturbed at room temperature for 14 days before the first burn. The scent throw climbs the entire time.

8. 08

   Trim the wick to 5 mm before lighting. Burn the first time for two hours minimum to set the memory ring.

If you can't find Golden Brands 464 Soy

• Same family (soy)
  Golden Brands 444 Soy

  Higher melt point than 464, better hot throw in wider vessels.

• Same family (soy)
  Golden Brands 415 Soy (Cold Pour)

  Cold-pour soy. Pour around 38°C to reduce sinkholes; tight discipline required.

• Same family (soy)
  Golden Brands 494 (Wax Melt)

  Wickless tart formula. Higher FO load since burn safety isn't a factor.